Last Updated: October 27, 2026
Start With the Power Supply and Circuit Breaker
Start with the power feeding the charger. Check the switchboard for a breaker that sits between on and off, or has moved to the middle position. If it keeps tripping, the circuit is drawing too much current or has a fault, and it should not be reset repeatedly.
Watch out: if a breaker trips the moment you reset it, stop and get a licensed electrician to look at it. Resetting it over and over can hide a fault that is getting worse.
Inspect the Charging Cable and Plug for Damage
Next, look at the cable and plug, since physical damage makes power drop out with no warning.

Do not use a cable that looks damaged, even if it still works. Replace it before you test the charger again.
Reset the Charger and Document the Fault Before Calling an Electrician
If the supply and cable check out, reset the intermittent ev charger and write down what happens. If you are ready to get it professionally handled, see how long EV charger installation takes at home to plan around the job. Switch the charger off at its isolator, wait a minute, then switch it back on. Note the time, the status lights, and any error codes, and whether the fault came back on its own.
Call a licensed electrician if the fault keeps coming back, the breaker trips again, or you see burning smells or scorch marks. If you have decided to have it looked at, you can book professional EV charger installation or repair in Atherton Tablelands. For an urgent issue outside regular hours, request an emergency callout and an electrician will get back to you. If the fault seems unsafe or urgent, read our guide on when to call an emergency electrician for rural properties before you wait any longer.